Come and visit the Sunshine Coast's leading supplier of Automotive and Industrial paints direct to the public. We carry a full range of panel and paint supplies, as well as restoration and corrosion prevention products. Air compressors, welders and welding consumables, sealers and adhesives, tools, spray guns, abrasives and more. Not sure if we've got what you need? Give us a call on (07) 5442 3197 and one of our friendly staff will help.

  
  

Raptor 4L Kit Black

00007

Raptor 4L Kit Black 00007

RAPTOR is a super-tough, highly durable, UV-stable coating that is applied by spray gun, roller or brush. RAPTOR ensures protection against scratches, abrasions, rust, corrosion, damp and extreme temperatures.

RAPTOR is supplied in 1litre, 2 litre and 4 litre kits.

RAPTOR is a product of U-POL, a world leader in automotive refinish products. Originally commencing business in 1948 as manufacturers of polyester bodyfiller for car repair, U-POL has expanded to produce paints, coatings and ancillary products for car body repair.

Supplied in BLACK and TINTABLE versions, RAPTOR may be matched to ANY COLOUR with the addition of automotive basecoat tinters

  • Can be applied with underbody schutz gun, paint roller, paint brush or spray gun – no spray booth required
  • Helps deaden sound and vibrations; waterproof seal and is UV resistant
  • Can be used as non-skid and slip-resistant coating (if anti-slip grit is added)
  • Protects against rust, corrosion, damp, and extreme temperature
  • Provides excellent UV protection
  • Resistant against fuels, hydraulic oils, animal urine, salt water and more
  • High coverage – up to 12 m² per 4 litre kit

Wide variety of finish textures. The texture pattern can be changed by:

  • Varying the speed of spray application

and altering the distance that the gun

is held from the surface

  • The addition of suitable thinner

(up to 10%) will give a smoother finish

  • Using higher/lower spray gun pressure
  • Using paint roller or paint brush

Using appropriate surface preparation, RAPTOR will stick to:

  • Steel, aluminium and zinc-coated metals

Cured 2K paints

  • Fibreglass, plastics and vinyl

(even seats – RAPTOR remains highly flexible)

  • Concrete, timber and fibro

To achieve a flat finish with reduced texture:

  • Reduce the RAPTOR 10-20% with good

quality 2 pac reducer

  • Apply with a gravity feed spray gun,

using a 1.6mm - 2mm nozzle, depending

on amount of reducer used

  • Adjust inlet pressure on the spray gun

to between 35-60 PSI

  • Hold the gun approximately 30-60

centimetres from the surface

  • Apply the RAPTOR in a sweeping motion

to obtain the desired build and texture

  • Allow each coat 60 minutes to flash off before applying the next coat
AU$280.5 In stock